Home>Products>THK Bearings>HSR15-820L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
THK HSR15-820L RAIL MODELS
Need a CAD or 3D Model?
HSR15-820L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
category
THK Bearings
THK HSR15-820L RAIL Bearing SPECIFICATIONS
- THK
HSR15-820L RAIL
- 50 mm
- 6300 kgf
- 130.2 mm
- 3900 kgf
- Round
- Contact with Flinger
- Heavy Duty
- 61 mm
- NACHI DRIVESHAFT,INC.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Specifications for THK Bearings
- 50 mm
- 6300 kgf
- 130.2 mm
- 3900 kgf
- Round
- Contact with Flinger
- Heavy Duty
- 61 mm
- Four-Bolt Flange
- Lubrication Fitting
- Cast Iron
- UCFU300
- Set Screw
- UC310
- Non-Expansion Bearing (Fixed)
THK HSR15-820L RAIL HSR15-820L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) Characteristics
K - Factor7 | 1.74 |
Cage Type | Pin-Type |
Y1 - ISO Factor9 | 2.02 |
r - Cup Backface To Clear Radius2 | 0.130 in |
B - Double Cone Width | 6.2500 in |
R - Cone Frontface To Clear Radius1 | 0.130 in |
Bearing Weight | 174.70 lb |
T - Bearing Width across Cups | 6.2499 in |
C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3 | 97800 lbf |
Ab - Cage-Cone Frontface Clearance | 0.21 in |
da - Cone Frontface Backing Diameter | 13.39 in |
Design Units | Imperial |
Cg - Geometry Factor11 | 0.186 |
D | 17.6250 in |
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4 | 656000 lbf |
Series | HM259000 |
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5 | 170000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 56000 lbf |
Db - Cup Backface Backing Diameter | 16.46 in |
d | 12.5000 in |
Same THK Bearings Supply Ability | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | d | T | D | C | B | a | R | r |
06NUP0820NRC3 | KOYO | 32 mm | - | 75 mm | 20 mm | - | - | - | - |
14R1820CP | KOYO | 14 | - | 18 | 9,43 kN | 20 mm | - | - | - |
02872/02820 | Timken | 28,575 mm | 22,225 mm | 73,025 mm | 17,462 mm | 22,225 mm | - | 0,8 mm | 3,3 mm |
02872/02820/Q | SKF | 28,575 mm | 22,225 mm | 73,025 mm | 57,2 kN | 22,225 mm | 26 mm | - | - |
02872/2820 | ISB | 28,575 mm | 22,225 mm | 73,025 mm | 97 kN | 20,165 mm | - | - | - |
02875/02820 | Loyal | 31,75 mm | 22,225 mm | 73,025 mm | 60,8 kN | 22,225 mm | 3,8 mm | - | - |
02876/02820 | Loyal | 31,75 mm | 22,225 mm | 73,025 mm | 60,8 kN | 22,225 mm | 3,8 mm | - | - |
02877/02820 | Loyal | 34,925 mm | 22,225 mm | 73,025 mm | 60,8 kN | 22,225 mm | 3,8 mm | - | - |
02878/02820 | Loyal | 34,925 mm | 22,225 mm | 73,025 mm | 60,8 kN | 22,225 mm | 3,8 mm | - | - |
20BTM2820A | KOYO | 20 | - | 28 mm | 17,4 kN | - | - | - | - |
YM222820 | KOYO | 22 | - | 28 mm | 21 kN | - | - | - | - |
HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Y2 - ISO Factor6:3.15; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):182; Y1 - ISO Factor5:2.12; K - Factor3:1.83; Da - Cup Frontface Backing Diameter:10.55 in; Cg - Geometry Factor8:0.117; Y - ISO Factor1:1.88; Series:LM241100; G1 - Heat Generation Factor (Roller-Raceway)7:774 |
HSR45-2145L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Cr - Dynamic Load Rating:71105 lbf; Series Type:Light Series; Note:This product line wa; Cor - Static Load Rating:96059 lbf; Housing Width:5.5 in; Dimension M :5-1/8 in; Maximum Speed:1970 rpm; Dimension K :3-1/4 in; Bolt Size:4 x 7/8; Dimension J1 :16 in; Bearing Type:Split Cylindric |
HSR35-1400L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Inside Ring Outside Diameter:3.980 in; Flange Thickness A1:22.2 mm; Dimension E:3.807 in; Dynamic Load Rating:15500 lbf; Inside Ring Width B:=Bearings1_Inside Ri; Housing Style:Four-Bolt Square Fla; Static Load Rating:10100 lbf; Housing Width A:2.626 in; Bearing Number:GE75KRRB; Bolt Size:M16; Weigh |
HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Dimension SV:3.75 in; Shaft Size :85 mm; Dimension L Exp:4.54 in; Dimension H:1.50 in; Grease Lubrication - T Seal:1600 rpm; e - Geometry Factor:0.26; Dimension BC:11.75 in; Shaft Size Type:Metric; UPC Code:0883450341189; Dimension E:8.31 in; Dimension RV:0.71 in; Dimension L:4.46 in; Bea |
HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Sleeve Weight:48.50 lb; Locknut:N-052; L2:210.00 mm; Series:223K; Taper:1:12; Lockwasher and Lockplates:P-52; Removal Nut:RN-56; Sleeve:SK-28023; Diameter d:260 mm; Bearing Number:22356K; Major Diameter:301.27 mm; Tolerance1:-0.15 mm; Removal Nut O.D. C:385.78 mm; a:10.00 mm; |
HSR35-920L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Grease Lubrication - M/N Seal:2200 rpm; Grease Lubrication - T Seal:3200 rpm; Dimension M:1.99 in; C0 - Static Load:31900 lb; Dimension L Fix:3.29 in; Bearing Number:22211; Pre Install Clearance Min:0.0016 in; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.95; Dimension S:3.12 in; Dimension R:0.16 |
HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Da - Outer Ring Backing Diameter:673.000 mm; Bearing Weight:222 Kg; r - Outer Ring To Clear Radius2:5.000 mm; Cg - Geometry Factor8:0.1037; B - Outer Ring Width:167.000 mm; Bore Taper:1/12; C0 - Static Radial Rating:8160000 N; D:720.000 mm; R - Inner Ring To Clear Radius1:5.000 mm; B - Inner Ring Wi |
HSR45-2775L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Inner Ring Width:118 mm; Bore Taper:1/12; r - Outer Ring To Clear Radius2:3.0 mm; e - ISO Factor3:0.16; Reference Thermal Speed Rating (Grease):580; R - Inner Ring To Clear Radius1:3.0 mm; Cg - Geometry Factor8:0.0975; Y1 - ISO Factor5:6.17; B - Outer Ring Width:118.000 mm; da - Inner Ring Backi |
HSR45-2880L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | a - Effective Center Location3:-12.2 mm; e - ISO Factor8:0.41; db - Cone Backface Backing Diameter:179.07 mm; C0 - Static Radial Rating:231000 lbf; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:8.6 mm; Series:99000; Y - ISO Factor9:1.47; G2 - Heat Generation Factor (Rib-Roller End):73.5 |
HSR45-2565L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cage Type:Stamped Steel; e - ISO Factor8:0.38; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; K - Factor7:1.53; Ab - Cage-Cone Frontface Clearance:1.8 mm; Cup Part Number:14283; R - Cone Backface To Clear Radius1:3.560 m |
HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Double Cone Width:5.6875 in; K - Factor7:1.76; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:479000 lbf; R - Cone Frontface To Clear Radius2:0.130 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:124000 lbf; db - Cone Backface Backing Diameter:13.82 in; C90 - |
HSR45-2355L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | H:242 mm; UPC Code:999999999; Seal Type:Labyrinth; J:350.00 mm; L:410.00 mm; Locating Rings (width x OD):SR200X17.5; Shaft Diameter d:85 mm; N1:24.00 mm; J1:70 mm; N:18 mm; A1:120 mm; Material :Cast Iron; Housing Mass:22.3 Kg; Lockwasher:MB19; End Cover2:EC522-619; A:175.00 mm; Seal:LO619; Lock |
HSR45-2985L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Oil Lubrication - T Seal:1500 rpm; Housing Style:Round Flange; Pre Install Clearance Max:0.145 mm; Dimension R:0.59 in; Eng Internal Radial Clearance - Max:0.0057; Oil Lubrication - B/C/O Seal:400 rpm; Dimension BC:14.00 in; Float:0.083 in; C - Dynamic Load (Basic):170000 lb; e - Geometry Factor:0.2 |
HSR45-2040L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Major Diameter:119.94 mm; Removal Nut O.D. C:160.32 mm; Taper:1:12; L2:98.00 mm; Removal Nut:ARN-22; Sleeve Weight:4.25 lb; Diameter d:100 mm; Locknut:AN-20; Lockwasher and Lockplates:W-20; Bearing Number:22322K; a:4.00 mm; Tolerance1:-0.10 mm; Series:223K; Sleeve:SK-11023; |
HSR15-820L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) Video
HSR15-820L RAIL THK Linear Motion Guide | Lily Bearing
HSR15-820L RAIL THK Linear Motion Guide ; Maximum length, 820 mm ; Nominal rail size, 15 mm ; Measurement standard, Metric ; Hardness, 58 to 64 HRC ; Series, HSR15.Rail type: Caged Ball RailHardness: 58 to 64 HRCMaximum length: 820 mm
STANDARD RAIL NO CARRIAGE LENGTH L: 820 MM
Jan 13, 2022 — THK HSR15-820L(GK) RAIL - STANDARD RAIL NO CARRIAGE LENGTH L: 820 MM. $109.99. In stock. SKU. I610801. Inventory updated: Thursday, January ...
THK HSR15-820L(GK) RAIL - STANDARD RAIL NO ... - eBay
This lot is for oneTHK HSR15-820L(GK) RAIL - NO SLIDE. Length: 820 mm. This unit will arrive in the condition shown. A signed credit card authorization form ...
THK Standard Rail (HSR) | BSPD Bearing Manufacturing
THK Standard Rail (HSR). The HSR guide rail and HSR of the steel ball bearing row are precision-grounded with 4 rolling ... HSR15-820L RAIL, 15 mm, 820 mm.
THK HSR25-820L RAIL
THK HSR25-820L RAIL Linear Motion, LM Guides, Linear bearing, Linear Guide, Ball Splines, Ball Screws, electric actuators, mechatronics products, ...
LM Guide - THK Technical Support
LM rail dimensions. Mass. Width. Height Pitch. Length. LM rail. W1. ±0.05. W2. M1. F d1×d2×h. (G,g) kg/m. HSR 15. 15. 16. 15. 60 4.5× 7.5× 5.3 3000(20,40).36 pagesMissing: 820L | Must include: 820L
THK Store-Standard Rail (HSR)
Standard Rail (HSR) ; Size: 15. Rail Length (mm): 820. HSR15-820L RAIL, –. - +. Days to Ship: 1 - 3 days ; Size: 15. Rail Length (mm): 940. HSR15-940L RAIL, –. -
Thk Hsr15 FOR SALE! | PicClick
1X Compatible with THK rail slider SSR HSR15 HSR20 HSR25 HSR30 ... Thk Hsr15-820L(Gk) Rail - Standard Rail No Carriage Length L: 820 Mm.
GSR15 Series Linear Motion Control System | Technico
We offer a variety of THK linear guide system products at Technico, including the GSR15 ... The LM rail and block are interchangeable with one another, ...
THK HSR15-820L RAIL INTERCHANGE
THK Bearings Part series HSR15-820L RAIL is a potential replacement for these common bearing part numbers:
HSR15-820L RAIL
HSR15-820L RAIL
HSR15-820L RAIL
HSR15-820L RAIL
HSR15-820L RAIL
HSR15-820L RAIL
HSR15-820L RAIL
HSR15-820L RAIL
Contact Us
- NACHI DRIVESHAFT,INC.
- Address7854 South International Drive, Columbus, IN 34509,U.S.A.
- Phone(Working Time)83-342-11555
- Fax
THK HSR15-820L RAIL Technical Articles
URB BEARING PRICE LIST 2019 |
TAPER ROLLER BEARING PRICE LIST |
GEM BEARING PRICE LIST |
THK Bearings CATEGORIES
- Cross-Split Spherical Roller Bearings
- Double Row Spherical Roller Bearings
- Single Row Cylindrical Roller Bearings
- Single Row Deep Groove Ball Bearings
- Single Row Tapered Roller Bearings
- Special Bearings
- Spherical Roller Thrust Bearings
- Double Row Self-Aligning Ball Bearings
- Single Direction Thurst Ball Bearings
- Double Row Angular Contact Ball Bearing
- Nok Seal
- Skf Shaft Seals
- Timken National Seals
- Wind Power Bearings
- Taper Roller Bearing
- YRT bearing
- Kaydon Bearings
- SKF Bearings
- THK Bearings
- Small V Belt
- 48r4289 Belt
- Multi V Belts
- Gates Snowmobile Belts
- K060685 Belt
Customers Who Viewed THK HSR15-820L RAIL Bearing Also Viewed
- HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)