Home>Products>THK Bearings>HSR25-1840L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
THK HSR25-1840L RAIL MODELS
Need a CAD or 3D Model?
HSR25-1840L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
category
THK Bearings
THK HSR25-1840L RAIL Bearing SPECIFICATIONS
- THK
HSR25-1840L RAIL
- 0.1900 in
- 200 lb
- .4690 in
- Grease
- Female Threaded with Male Stud
- Max 350°
- #10-32
- .6250 in
- NACHI DRIVESHAFT,INC.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Specifications for THK Bearings
- 0.1900 in
- 200 lb
- .4690 in
- Grease
- Female Threaded with Male Stud
- Max 350°
- #10-32
- .6250 in
- Right Hand
- .2500 in
- Commercial
- .3120 in
- Self Lubricating
- 1.0620 in
- Carbon Steel - corrosion resistant plating
- CFF
- Alloy Steel - heat treated - chrome plated
- 1490308000
- 2000 lb
THK HSR25-1840L RAIL HSR25-1840L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) Characteristics
C0 - Static Radial Rating | 678000 N |
B - Inner Ring Width | 60.3 mm |
Y1 - ISO Factor5 | 3.3 |
B - Outer Ring Width | 60.300 mm |
R - Inner Ring To Clear Radius1 | 2.0 mm |
Design Unit | METRIC |
C1(2) - Dynamic Radial Rating (Two-Rows) | 554000 N |
Reference Thermal Speed Rating (Grease) | 2300 |
Bearing Weight | 6.6 Kg |
Y2 - ISO Factor6 | 2.17 |
Cg - Geometry Factor8 | 0.0695 |
Cage Material | Steel |
r - Outer Ring To Clear Radius2 | 2.0 mm |
D | 180 mm |
da - Inner Ring Backing Diameter | 119.0 mm |
e - ISO Factor3 | 0.3 |
d | 100 mm |
Superseded Part | 23220KCJW841 |
Bore Taper | 1/12 |
Da - Outer Ring Backing Diameter | 164.000 mm |
Same THK Bearings Supply Ability | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | E | C | H | s | D | d | S | |
SX011840 | INA | 0,010 mm / Running accuracy, axial | - | - | - | - | 250 | 200 | 2 mm |
SX 011840 | ISB | - | - | 106 kN | - | 2 mm | 250 mm | 200 mm | - |
713618400 | FAG | - | - | - | - | - | - | - | - |
SL181840 | NBS | - | 237,6 mm | 183 kN | - | - | 250 mm | 200 mm | 2 mm |
CRT18401 | NTN | - | - | - | 150 mm | - | 1120 mm | 920 mm | - |
4R18401 | NTN | - | - | 865,000 mm | - | - | 1280,000 mm | 920,000 mm | - |
361840 | SKF | - | - | - | - | - | 940 mm | 730 mm | - |
E-4R18401 | NTN | - | - | 26 200 kN | - | - | 1 280 mm | 920 mm | - |
61840 | ISO | - | - | 24 mm | - | - | 250 mm | 200 mm | - |
61840-MA | NKE | - | - | 82 kN | - | - | 250 mm | 200 mm | - |
61840M | SIGMA | - | - | 24 mm | - | - | 250 mm | 200 mm | - |
HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Double Cone Width:5.6875 in; K - Factor7:1.76; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:479000 lbf; R - Cone Frontface To Clear Radius2:0.130 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:124000 lbf; db - Cone Backface Backing Diameter:13.82 in; C90 - |
HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Da - Outer Ring Backing Diameter:673.000 mm; Bearing Weight:222 Kg; r - Outer Ring To Clear Radius2:5.000 mm; Cg - Geometry Factor8:0.1037; B - Outer Ring Width:167.000 mm; Bore Taper:1/12; C0 - Static Radial Rating:8160000 N; D:720.000 mm; R - Inner Ring To Clear Radius1:5.000 mm; B - Inner Ring Wi |
HSR35-1400L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Inside Ring Outside Diameter:3.980 in; Flange Thickness A1:22.2 mm; Dimension E:3.807 in; Dynamic Load Rating:15500 lbf; Inside Ring Width B:=Bearings1_Inside Ri; Housing Style:Four-Bolt Square Fla; Static Load Rating:10100 lbf; Housing Width A:2.626 in; Bearing Number:GE75KRRB; Bolt Size:M16; Weigh |
HSR45-2145L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Cr - Dynamic Load Rating:71105 lbf; Series Type:Light Series; Note:This product line wa; Cor - Static Load Rating:96059 lbf; Housing Width:5.5 in; Dimension M :5-1/8 in; Maximum Speed:1970 rpm; Dimension K :3-1/4 in; Bolt Size:4 x 7/8; Dimension J1 :16 in; Bearing Type:Split Cylindric |
HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Sleeve Weight:48.50 lb; Locknut:N-052; L2:210.00 mm; Series:223K; Taper:1:12; Lockwasher and Lockplates:P-52; Removal Nut:RN-56; Sleeve:SK-28023; Diameter d:260 mm; Bearing Number:22356K; Major Diameter:301.27 mm; Tolerance1:-0.15 mm; Removal Nut O.D. C:385.78 mm; a:10.00 mm; |
HSR45-2775L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Inner Ring Width:118 mm; Bore Taper:1/12; r - Outer Ring To Clear Radius2:3.0 mm; e - ISO Factor3:0.16; Reference Thermal Speed Rating (Grease):580; R - Inner Ring To Clear Radius1:3.0 mm; Cg - Geometry Factor8:0.0975; Y1 - ISO Factor5:6.17; B - Outer Ring Width:118.000 mm; da - Inner Ring Backi |
HSR45-2355L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | H:242 mm; UPC Code:999999999; Seal Type:Labyrinth; J:350.00 mm; L:410.00 mm; Locating Rings (width x OD):SR200X17.5; Shaft Diameter d:85 mm; N1:24.00 mm; J1:70 mm; N:18 mm; A1:120 mm; Material :Cast Iron; Housing Mass:22.3 Kg; Lockwasher:MB19; End Cover2:EC522-619; A:175.00 mm; Seal:LO619; Lock |
HSR45-2880L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | a - Effective Center Location3:-12.2 mm; e - ISO Factor8:0.41; db - Cone Backface Backing Diameter:179.07 mm; C0 - Static Radial Rating:231000 lbf; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:8.6 mm; Series:99000; Y - ISO Factor9:1.47; G2 - Heat Generation Factor (Rib-Roller End):73.5 |
HSR45-2565L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cage Type:Stamped Steel; e - ISO Factor8:0.38; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; K - Factor7:1.53; Ab - Cage-Cone Frontface Clearance:1.8 mm; Cup Part Number:14283; R - Cone Backface To Clear Radius1:3.560 m |
HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Y2 - ISO Factor6:3.15; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):182; Y1 - ISO Factor5:2.12; K - Factor3:1.83; Da - Cup Frontface Backing Diameter:10.55 in; Cg - Geometry Factor8:0.117; Y - ISO Factor1:1.88; Series:LM241100; G1 - Heat Generation Factor (Roller-Raceway)7:774 |
HSR45-2985L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Oil Lubrication - T Seal:1500 rpm; Housing Style:Round Flange; Pre Install Clearance Max:0.145 mm; Dimension R:0.59 in; Eng Internal Radial Clearance - Max:0.0057; Oil Lubrication - B/C/O Seal:400 rpm; Dimension BC:14.00 in; Float:0.083 in; C - Dynamic Load (Basic):170000 lb; e - Geometry Factor:0.2 |
HSR45-2040L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Major Diameter:119.94 mm; Removal Nut O.D. C:160.32 mm; Taper:1:12; L2:98.00 mm; Removal Nut:ARN-22; Sleeve Weight:4.25 lb; Diameter d:100 mm; Locknut:AN-20; Lockwasher and Lockplates:W-20; Bearing Number:22322K; a:4.00 mm; Tolerance1:-0.10 mm; Series:223K; Sleeve:SK-11023; |
HSR35-920L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Grease Lubrication - M/N Seal:2200 rpm; Grease Lubrication - T Seal:3200 rpm; Dimension M:1.99 in; C0 - Static Load:31900 lb; Dimension L Fix:3.29 in; Bearing Number:22211; Pre Install Clearance Min:0.0016 in; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.95; Dimension S:3.12 in; Dimension R:0.16 |
HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Dimension SV:3.75 in; Shaft Size :85 mm; Dimension L Exp:4.54 in; Dimension H:1.50 in; Grease Lubrication - T Seal:1600 rpm; e - Geometry Factor:0.26; Dimension BC:11.75 in; Shaft Size Type:Metric; UPC Code:0883450341189; Dimension E:8.31 in; Dimension RV:0.71 in; Dimension L:4.46 in; Bea |
HSR25-1840L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) Video
sitemap.xml - THK
https://www.thkstore.com/products.html 2015-07-17T11:10:35+00:00 daily 0.5 ... BLOCK https://www.thkstore.com/products/custom/hsr25-820lm-gk-rail.html ...
THK HSR25-1840L RAIL
THK HSR25-1840L RAIL Linear Motion, LM Guides, Linear bearing, Linear Guide, Ball Splines, Ball Screws, electric actuators, mechatronics products, ...
HSR25-1840L RAIL THK Linear Motion Guide - bob竞技体育
HSR25-1840L RAIL THK Linear Motion Guide ; Maximum length, 1840 mm ; Nominal rail size, 25 mm ; Measurement standard, Metric ; Hardness, 58 to 64 HRC ; Series, HSR25.
HSR25 Series Linear Motion Guides - Technico Inc
The THK HSR Series of linear motion guides (also known as "LM guides") incorporate linear rolling motion for practical use. In this series, the rows of ...
LM Guide - THK Technical Support
(3) When parallelism is poor when mounting 2 or more rails, or ... HSR25. (Conventional Full-ball Type). Greased every 100 km. SHS25. (Caged Ball LM Guide).Missing: 1840L | Must include: 1840L
THK Standard Rail (HSR) - THK Global Standard LM ...
Hisaka Vietnam would like to introduce you to the collection of THK Standard Rail (HSR) - one of the outstanding products of THK brand from Japan.HSR 25: HSR25-220L RAIL; HSR25-280L RAIL; ...HSR 65: HSR65-1270L RAIL; HSR65-1570L ...HSR 30: HSR30-280L RAIL; HSR30-360L RAIL; ...HSR 35: HSR35-280L RAIL; HSR35-360L RAIL; ...
THK HSR25 Linear Bearings w/45.5" Guide Rail - eBay
THK HSR25 Linear Guide Rail Bearing Block For 25mm Rail, 2-3/4"x 3-1/8" - USED. $59.99. + $11.40 shipping+ $11.40 shipping+ $11.40 shipping ...
HSR25-1300L RAIL THK Linear Motion Guide | Lily Bearing
Part Number, HSR25-1300L RAIL. Rail type, Caged Ball Rail. Maximum length, 1300 mm. Nominal rail size, 25 mm. Measurement standard, Metric.
SR25-1840L LM GUIDE Rail Used THK Linear Bearing for ...
SR25-1840L LM GUIDE Rail Used THK Linear Bearing for maintenance or continuation - $149.95. FOR SALE! This rail is just for THK SR25 block.
THK HSR25-1840L RAIL INTERCHANGE
THK Bearings Part series HSR25-1840L RAIL is a potential replacement for these common bearing part numbers:
HSR25-1840L RAIL
HSR25-1840L RAIL
HSR25-1840L RAIL
HSR25-1840L RAIL
HSR25-1840L RAIL
HSR25-1840L RAIL
HSR25-1840L RAIL
HSR25-1840L RAIL
Contact Us
- NACHI DRIVESHAFT,INC.
- Address7854 South International Drive, Columbus, IN 34509,U.S.A.
- Phone(Working Time)83-342-11555
- Fax
THK HSR25-1840L RAIL Technical Articles
URB BEARING PRICE LIST 2019 |
TAPER ROLLER BEARING PRICE LIST |
GEM BEARING PRICE LIST |
THK Bearings CATEGORIES
- Cross-Split Spherical Roller Bearings
- Double Row Spherical Roller Bearings
- Single Row Cylindrical Roller Bearings
- Single Row Deep Groove Ball Bearings
- Single Row Tapered Roller Bearings
- Special Bearings
- Spherical Roller Thrust Bearings
- Double Row Self-Aligning Ball Bearings
- Single Direction Thurst Ball Bearings
- Double Row Angular Contact Ball Bearing
- Nok Seal
- Skf Shaft Seals
- Timken National Seals
- Wind Power Bearings
- Taper Roller Bearing
- YRT bearing
- Kaydon Bearings
- SKF Bearings
- THK Bearings
- Small V Belt
- 48r4289 Belt
- Multi V Belts
- Gates Snowmobile Belts
- K060685 Belt
Customers Who Viewed THK HSR25-1840L RAIL Bearing Also Viewed
- HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)