Home>Products>THK Bearings>SR35-2200L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type Caged Ball LM Guide (SSR),Radial Rail (SR) for SSR Blocks
THK SR35-2200L RAIL MODELS
Need a CAD or 3D Model?
SR35-2200L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type Caged Ball LM Guide (SSR),Radial Rail (SR) for SSR Blocks
category
THK Bearings
THK SR35-2200L RAIL Bearing SPECIFICATIONS
- THK
SR35-2200L RAIL
- 1.2500 in
- 7530 lbf
- 4.0000 in
- 4320 lbf
- Round
- Contact with Flinger
- Heavy Duty
- 1.890 in
- NACHI DRIVESHAFT,INC.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Specifications for THK Bearings
- 1.2500 in
- 7530 lbf
- 4.0000 in
- 4320 lbf
- Round
- Contact with Flinger
- Heavy Duty
- 1.890 in
- Four-Bolt Flange
- Lubrication Fitting
- Cast Iron
- UCFU300
- Set Screw
- UC307-20
- Non-Expansion Bearing (Fixed)
THK SR35-2200L RAIL SR35-2200L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type Caged Ball LM Guide (SSR),Radial Rail (SR) for SSR Blocks Characteristics
Bearing Type | Split Cylindrical Re |
Cor - Static Load Rating | 131513 lbf |
Note | This product line wa |
Maximum Speed | 1570 rpm |
Ca - Axial Load Rating | 5799.99 lbf |
Support Type | Take-Up |
Dimension V | 7.7 in |
Dimension A | 10.5 in |
Seal Type | Viton Single Lip |
Dimension R | 1.9 in |
Dimension P | 1.0 in |
Dimension B | 10.5 in |
Bearing Number | LSE503BR |
Dimension H | 2.1 in |
Shaft Size | 5-3/16 in |
Bearing - Housing - Seal | LSE503BRHRSS |
Dimension X | 1.7 in |
Dimension W | 1.7 in |
Cr - Dynamic Load Rating | 94869 lbf |
Bearing UPC | 013992059086 |
Same THK Bearings Supply Ability | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | e | d | m | D | C | B | C0 | Size |
S2200 | ZEN | - | 10 mm | - | 30 mm | 5,3 kN | 14 mm | 1,53 kN | 10x30x14 |
S2200-2RS | ZEN | - | 10 mm | - | 30 mm | 5,3 kN | 14 mm | 1,53 kN | 10x30x14 |
AST11 F22200 | AST | - | 22 | - | 25 | - | - | - | - |
AST40 F22200 | AST | - | 22 | - | 25 | - | - | - | - |
2200 | Loyal | - | 10 mm | - | 30 mm | 8,06 kN | 14 mm | 1,73 kN | 10x30x14 |
2200 ETN9 | SKF | - | 10 mm | - | 30 mm | - | 14 mm | - | 30x10x14 |
2200 TN9 | ISB | - | 10 mm | - | 30 mm | 7,90 kN | 14 mm | 1,70 kN | 10x30x14 |
2200-2RS | Loyal | - | 10 mm | - | 30 mm | 8,06 kN | 14 mm | 1,73 kN | 10x30x14 |
2200-2RS-TVH | FAG | 0,32 | 10 mm | 0,053 kg / Weight | 30 mm | - | 14 mm | - | 10x30x14 |
2200-2RSTN9 | ISB | - | 10 mm | - | 30 mm | 5,42 kN | 14 mm | 1,16 kN | 10x30x14 |
2200-TVH | FAG | 0,58 | 10 mm | 0,045 kg / Weight | 30 mm | - | 14 mm | - | 10x30x14 |
HSR45-2145L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Cr - Dynamic Load Rating:71105 lbf; Series Type:Light Series; Note:This product line wa; Cor - Static Load Rating:96059 lbf; Housing Width:5.5 in; Dimension M :5-1/8 in; Maximum Speed:1970 rpm; Dimension K :3-1/4 in; Bolt Size:4 x 7/8; Dimension J1 :16 in; Bearing Type:Split Cylindric |
HSR45-2775L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Inner Ring Width:118 mm; Bore Taper:1/12; r - Outer Ring To Clear Radius2:3.0 mm; e - ISO Factor3:0.16; Reference Thermal Speed Rating (Grease):580; R - Inner Ring To Clear Radius1:3.0 mm; Cg - Geometry Factor8:0.0975; Y1 - ISO Factor5:6.17; B - Outer Ring Width:118.000 mm; da - Inner Ring Backi |
HSR45-2565L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cage Type:Stamped Steel; e - ISO Factor8:0.38; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; K - Factor7:1.53; Ab - Cage-Cone Frontface Clearance:1.8 mm; Cup Part Number:14283; R - Cone Backface To Clear Radius1:3.560 m |
HSR35-920L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Grease Lubrication - M/N Seal:2200 rpm; Grease Lubrication - T Seal:3200 rpm; Dimension M:1.99 in; C0 - Static Load:31900 lb; Dimension L Fix:3.29 in; Bearing Number:22211; Pre Install Clearance Min:0.0016 in; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.95; Dimension S:3.12 in; Dimension R:0.16 |
HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Dimension SV:3.75 in; Shaft Size :85 mm; Dimension L Exp:4.54 in; Dimension H:1.50 in; Grease Lubrication - T Seal:1600 rpm; e - Geometry Factor:0.26; Dimension BC:11.75 in; Shaft Size Type:Metric; UPC Code:0883450341189; Dimension E:8.31 in; Dimension RV:0.71 in; Dimension L:4.46 in; Bea |
HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Sleeve Weight:48.50 lb; Locknut:N-052; L2:210.00 mm; Series:223K; Taper:1:12; Lockwasher and Lockplates:P-52; Removal Nut:RN-56; Sleeve:SK-28023; Diameter d:260 mm; Bearing Number:22356K; Major Diameter:301.27 mm; Tolerance1:-0.15 mm; Removal Nut O.D. C:385.78 mm; a:10.00 mm; |
HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Y2 - ISO Factor6:3.15; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):182; Y1 - ISO Factor5:2.12; K - Factor3:1.83; Da - Cup Frontface Backing Diameter:10.55 in; Cg - Geometry Factor8:0.117; Y - ISO Factor1:1.88; Series:LM241100; G1 - Heat Generation Factor (Roller-Raceway)7:774 |
HSR45-2985L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Oil Lubrication - T Seal:1500 rpm; Housing Style:Round Flange; Pre Install Clearance Max:0.145 mm; Dimension R:0.59 in; Eng Internal Radial Clearance - Max:0.0057; Oil Lubrication - B/C/O Seal:400 rpm; Dimension BC:14.00 in; Float:0.083 in; C - Dynamic Load (Basic):170000 lb; e - Geometry Factor:0.2 |
HSR45-2880L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | a - Effective Center Location3:-12.2 mm; e - ISO Factor8:0.41; db - Cone Backface Backing Diameter:179.07 mm; C0 - Static Radial Rating:231000 lbf; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:8.6 mm; Series:99000; Y - ISO Factor9:1.47; G2 - Heat Generation Factor (Rib-Roller End):73.5 |
HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Double Cone Width:5.6875 in; K - Factor7:1.76; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:479000 lbf; R - Cone Frontface To Clear Radius2:0.130 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:124000 lbf; db - Cone Backface Backing Diameter:13.82 in; C90 - |
HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Da - Outer Ring Backing Diameter:673.000 mm; Bearing Weight:222 Kg; r - Outer Ring To Clear Radius2:5.000 mm; Cg - Geometry Factor8:0.1037; B - Outer Ring Width:167.000 mm; Bore Taper:1/12; C0 - Static Radial Rating:8160000 N; D:720.000 mm; R - Inner Ring To Clear Radius1:5.000 mm; B - Inner Ring Wi |
HSR45-2355L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | H:242 mm; UPC Code:999999999; Seal Type:Labyrinth; J:350.00 mm; L:410.00 mm; Locating Rings (width x OD):SR200X17.5; Shaft Diameter d:85 mm; N1:24.00 mm; J1:70 mm; N:18 mm; A1:120 mm; Material :Cast Iron; Housing Mass:22.3 Kg; Lockwasher:MB19; End Cover2:EC522-619; A:175.00 mm; Seal:LO619; Lock |
HSR45-2040L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Major Diameter:119.94 mm; Removal Nut O.D. C:160.32 mm; Taper:1:12; L2:98.00 mm; Removal Nut:ARN-22; Sleeve Weight:4.25 lb; Diameter d:100 mm; Locknut:AN-20; Lockwasher and Lockplates:W-20; Bearing Number:22322K; a:4.00 mm; Tolerance1:-0.10 mm; Series:223K; Sleeve:SK-11023; |
HSR35-1400L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Inside Ring Outside Diameter:3.980 in; Flange Thickness A1:22.2 mm; Dimension E:3.807 in; Dynamic Load Rating:15500 lbf; Inside Ring Width B:=Bearings1_Inside Ri; Housing Style:Four-Bolt Square Fla; Static Load Rating:10100 lbf; Housing Width A:2.626 in; Bearing Number:GE75KRRB; Bolt Size:M16; Weigh |
SR35-2200L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type Caged Ball LM Guide (SSR),Radial Rail (SR) for SSR Blocks Video
THK Radial Rail (SR) - THK Radial Type LM Guide (SR)
Radial Rail (SR) is one of the outstanding products in THK Radial Type LM Guide ... SR20-2200L RAIL; SR20-3000L RAIL; SR20-L RAIL FOR SR – Custom Length.
GSR35 Series Linear Motion System | Technico
Like the THK HRW Series, the GSR models are compact, low profile, and able to bear loads in all directions. The LM rail and block are interchangeable with one ...
Linear Guides - Durga Bearings
Items 1 - 12 of 97 — SRS9X-1000LM THK · SRS9W-1000LM THK · SRS15-1000LM (RAIL) THK · SRS12-1000LM (RAIL) THK · SR35 (RAIL) THK · SR30 (RAIL) THK.
SR linear THK catalogue - Tuli
Since a retainer plate holds the balls, they will not fall off even if the LM block is removed from the LM rail. With the low sectional height and the high ...
LM Guide - THK Technical Support
LM rail. Shaft. Stage. Linear bushing. Housing. 34. 24. 165. 170. LM Guide Model SR15W. Basic dynamic load rating: 13.8kN. Linear Bushing Model LM80GA OP.36 pages
THK Store-Radial Rail (SR)
Rails for SR Blocks. View specifications and model number coding. Downloads - Log In required. General Catalog LM Guide; Quick Ship Catalog US102-2E.
LM Guide SR — High-Rigidity Radial Type
not fall off if the LM block is removed from the rail. ... [email protected] ... SR 35. SR 45. SR 55. SR 70. SR 85. SR 100. SR 120. SR 150. Unit : µm.21 pages
SR20-2200L RAIL THK Linear Motion Guide | Lily Bearing
SR20-2200L RAIL THK Linear Motion Guide ; Nominal rail size, 20 mm ; Measurement standard, Metric ; Hardness, 58 to 64 HRC ; Series, SR20 ; Standard pitch F · 60.Rail type: Caged Ball RailMaximum length: 2200 mmSeries: SR20Hardness: 58 to 64 HRC
SR35-2280L RAIL THK Linear Motion Guide - 养贞轴承
Find details about thk SR35-2280L RAIL, Get price reference, professional technical support and free 3D drawing Download.
THK SR35-2200L RAIL INTERCHANGE
THK Bearings Part series SR35-2200L RAIL is a potential replacement for these common bearing part numbers:
SR35-2200L RAIL
SR35-2200L RAIL
SR35-2200L RAIL
SR35-2200L RAIL
SR35-2200L RAIL
SR35-2200L RAIL
SR35-2200L RAIL
SR35-2200L RAIL
Contact Us
- NACHI DRIVESHAFT,INC.
- Address7854 South International Drive, Columbus, IN 34509,U.S.A.
- Phone(Working Time)83-342-11555
- Fax
THK SR35-2200L RAIL Technical Articles
URB BEARING PRICE LIST 2019 |
TAPER ROLLER BEARING PRICE LIST |
GEM BEARING PRICE LIST |
THK Bearings CATEGORIES
- Cross-Split Spherical Roller Bearings
- Double Row Spherical Roller Bearings
- Single Row Cylindrical Roller Bearings
- Single Row Deep Groove Ball Bearings
- Single Row Tapered Roller Bearings
- Special Bearings
- Spherical Roller Thrust Bearings
- Double Row Self-Aligning Ball Bearings
- Single Direction Thurst Ball Bearings
- Double Row Angular Contact Ball Bearing
- Nok Seal
- Skf Shaft Seals
- Timken National Seals
- Wind Power Bearings
- Taper Roller Bearing
- YRT bearing
- Kaydon Bearings
- SKF Bearings
- THK Bearings
- Small V Belt
- 48r4289 Belt
- Multi V Belts
- Gates Snowmobile Belts
- K060685 Belt
Customers Who Viewed THK SR35-2200L RAIL Bearing Also Viewed
- HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)