Home>Products>THK Bearings>SRS15W-150LM RAIL THK Linear Bearing,Linear Motion Guides,Miniature Caged Ball LM Guide (SRS),Miniature Rail (SRS-W)
THK SRS15W-150LM RAIL MODELS
Need a CAD or 3D Model?
SRS15W-150LM RAIL THK Linear Bearing,Linear Motion Guides,Miniature Caged Ball LM Guide (SRS),Miniature Rail (SRS-W)
category
THK Bearings
THK SRS15W-150LM RAIL Bearing SPECIFICATIONS
- THK
SRS15W-150LM RAIL
- 1.4375 in
- 2150 lbf
- 3.9375 in
- 1080 lbf
- 4.8125 in
- Contact with Flinger
- Round
- 0.866 in
- NACHI DRIVESHAFT,INC.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Specifications for THK Bearings
- 1.4375 in
- 2150 lbf
- 3.9375 in
- 1080 lbf
- 4.8125 in
- Contact with Flinger
- Round
- 0.866 in
- Standard Duty
- Lubrication Fitting
- Two-Bolt Flange
- UEFX200NP
- Malleable Iron - Nickel Protection
- UE207-23
- Accu-Loc
THK SRS15W-150LM RAIL SRS15W-150LM RAIL THK Linear Bearing,Linear Motion Guides,Miniature Caged Ball LM Guide (SRS),Miniature Rail (SRS-W) Characteristics
Dimension A | 3.25 in |
Eng Internal Radial Clearance - Min | 0.0037 |
Dimension D Min | 7.60 in |
Dimension E | 1.88 in |
Locking Style | Double V-Lock |
Grease Lubrication - M/N Seal | 1500 rpm |
Dimension RVV | 0.60 in |
Dimension SVV | 4.18 in |
Shaft Size Type | Imperial |
Oil Lubrication - T Seal | 2650 rpm |
Weight | 27 lb |
Grease Lubrication - T Seal | 2200 rpm |
Dimension L | 3.66 in |
Dimension G | 3.130 in |
Dimension H | 1.29 in |
Y2 - Geometry Factor | 4.67 |
Pre Install Clearance Max | 0.0047 in |
Dimension J (Bolt Size) | 0.625 in |
Full Timken Part Number | QVVPF16V212SB |
Dimension F | 10.44 in |
Same THK Bearings Supply Ability | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | r | m | N | D | T | C | a | B |
00050/00150 | Loyal | - | - | - | 38,1 mm | 13,495 mm | 19,3 kN | 5,1 mm | 14,072 mm |
100FS150 | Timken | - | - | - | 150 mm | - | 55 mm | - | - |
100FSF150 | NSK | - | - | - | 150 mm | - | 510 kN | - | 70 mm |
150RUB32 | NSK | - | - | - | 270 mm | - | 690 kN | - | 96 mm |
150TMP12 | NSK | 2 | - | - | 215 mm | - | 375 | - | - |
150TMP93 | NSK | 2.1 | - | - | 250 mm | - | 635 | - | - |
150XRG23 | NACHI | 1,5 mm | - | - | 230 mm | 30 mm | 105 kN | - | 30 mm |
150XRN23 | NACHI | 1,5 mm | - | - | 230 mm | 30 mm | 105 kN | - | - |
ZR3.32.3150.400-1SPPN | ISB | - | 20 mm | 56 mm | 3368 mm | - | - | - | - |
ZR3.40.3150.400-1SPPN | ISB | - | 22 mm | 56 mm | 3388 mm | - | - | - | - |
150FSF220 | NSK | - | - | - | 220 mm | - | 1330 kN | - | 120 mm |
HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Y2 - ISO Factor6:3.15; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):182; Y1 - ISO Factor5:2.12; K - Factor3:1.83; Da - Cup Frontface Backing Diameter:10.55 in; Cg - Geometry Factor8:0.117; Y - ISO Factor1:1.88; Series:LM241100; G1 - Heat Generation Factor (Roller-Raceway)7:774 |
HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Sleeve Weight:48.50 lb; Locknut:N-052; L2:210.00 mm; Series:223K; Taper:1:12; Lockwasher and Lockplates:P-52; Removal Nut:RN-56; Sleeve:SK-28023; Diameter d:260 mm; Bearing Number:22356K; Major Diameter:301.27 mm; Tolerance1:-0.15 mm; Removal Nut O.D. C:385.78 mm; a:10.00 mm; |
HSR45-2355L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | H:242 mm; UPC Code:999999999; Seal Type:Labyrinth; J:350.00 mm; L:410.00 mm; Locating Rings (width x OD):SR200X17.5; Shaft Diameter d:85 mm; N1:24.00 mm; J1:70 mm; N:18 mm; A1:120 mm; Material :Cast Iron; Housing Mass:22.3 Kg; Lockwasher:MB19; End Cover2:EC522-619; A:175.00 mm; Seal:LO619; Lock |
HSR45-2040L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Major Diameter:119.94 mm; Removal Nut O.D. C:160.32 mm; Taper:1:12; L2:98.00 mm; Removal Nut:ARN-22; Sleeve Weight:4.25 lb; Diameter d:100 mm; Locknut:AN-20; Lockwasher and Lockplates:W-20; Bearing Number:22322K; a:4.00 mm; Tolerance1:-0.10 mm; Series:223K; Sleeve:SK-11023; |
HSR45-2985L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Oil Lubrication - T Seal:1500 rpm; Housing Style:Round Flange; Pre Install Clearance Max:0.145 mm; Dimension R:0.59 in; Eng Internal Radial Clearance - Max:0.0057; Oil Lubrication - B/C/O Seal:400 rpm; Dimension BC:14.00 in; Float:0.083 in; C - Dynamic Load (Basic):170000 lb; e - Geometry Factor:0.2 |
HSR35-920L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Grease Lubrication - M/N Seal:2200 rpm; Grease Lubrication - T Seal:3200 rpm; Dimension M:1.99 in; C0 - Static Load:31900 lb; Dimension L Fix:3.29 in; Bearing Number:22211; Pre Install Clearance Min:0.0016 in; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.95; Dimension S:3.12 in; Dimension R:0.16 |
HSR45-2145L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Cr - Dynamic Load Rating:71105 lbf; Series Type:Light Series; Note:This product line wa; Cor - Static Load Rating:96059 lbf; Housing Width:5.5 in; Dimension M :5-1/8 in; Maximum Speed:1970 rpm; Dimension K :3-1/4 in; Bolt Size:4 x 7/8; Dimension J1 :16 in; Bearing Type:Split Cylindric |
HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Dimension SV:3.75 in; Shaft Size :85 mm; Dimension L Exp:4.54 in; Dimension H:1.50 in; Grease Lubrication - T Seal:1600 rpm; e - Geometry Factor:0.26; Dimension BC:11.75 in; Shaft Size Type:Metric; UPC Code:0883450341189; Dimension E:8.31 in; Dimension RV:0.71 in; Dimension L:4.46 in; Bea |
HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Da - Outer Ring Backing Diameter:673.000 mm; Bearing Weight:222 Kg; r - Outer Ring To Clear Radius2:5.000 mm; Cg - Geometry Factor8:0.1037; B - Outer Ring Width:167.000 mm; Bore Taper:1/12; C0 - Static Radial Rating:8160000 N; D:720.000 mm; R - Inner Ring To Clear Radius1:5.000 mm; B - Inner Ring Wi |
HSR45-2565L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cage Type:Stamped Steel; e - ISO Factor8:0.38; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; K - Factor7:1.53; Ab - Cage-Cone Frontface Clearance:1.8 mm; Cup Part Number:14283; R - Cone Backface To Clear Radius1:3.560 m |
HSR45-2775L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Inner Ring Width:118 mm; Bore Taper:1/12; r - Outer Ring To Clear Radius2:3.0 mm; e - ISO Factor3:0.16; Reference Thermal Speed Rating (Grease):580; R - Inner Ring To Clear Radius1:3.0 mm; Cg - Geometry Factor8:0.0975; Y1 - ISO Factor5:6.17; B - Outer Ring Width:118.000 mm; da - Inner Ring Backi |
HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Double Cone Width:5.6875 in; K - Factor7:1.76; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:479000 lbf; R - Cone Frontface To Clear Radius2:0.130 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:124000 lbf; db - Cone Backface Backing Diameter:13.82 in; C90 - |
HSR45-2880L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | a - Effective Center Location3:-12.2 mm; e - ISO Factor8:0.41; db - Cone Backface Backing Diameter:179.07 mm; C0 - Static Radial Rating:231000 lbf; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:8.6 mm; Series:99000; Y - ISO Factor9:1.47; G2 - Heat Generation Factor (Rib-Roller End):73.5 |
HSR35-1400L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Inside Ring Outside Diameter:3.980 in; Flange Thickness A1:22.2 mm; Dimension E:3.807 in; Dynamic Load Rating:15500 lbf; Inside Ring Width B:=Bearings1_Inside Ri; Housing Style:Four-Bolt Square Fla; Static Load Rating:10100 lbf; Housing Width A:2.626 in; Bearing Number:GE75KRRB; Bolt Size:M16; Weigh |
SRS15W-150LM RAIL THK Linear Bearing,Linear Motion Guides,Miniature Caged Ball LM Guide (SRS),Miniature Rail (SRS-W) Video
SRS15W-150LM RAIL THK Miniature Rail (SRS-WG) | BSPD ...
SRS15W-150LM RAIL ; Rail type, Caged Ball Rail ; Maximum length, 150 mm ; Nominal rail size, 15 mm ; Measurement standard, Metric ; Hardness, 58 to 64 HRC.
SRS15WMUU+150LM | Miniature Linear Guide | THK | MISUMI
Can be mounted in areas in space saving areas, and a part of the LM block has been formed using resin to achieve lightweight. * When ordering matched rail types ...Rail Width W1(mm): 42Material: Stainless SteelRail Type: Wide RailShip Date: Wed. Mar 30, 2022$190.00 · In stockMissing: SRS15W- | Must include: SRS15W-
SRS15-150LM RAIL THK Linear Motion Guide - bob竞技体育
Find details about thk SRS15-150LM RAIL, Get price reference, professional technical support and free 3D drawing Download.
THK SRS15W-150LM Rail THK SSR Block - Lavaink Inks ...
This THK SRS15W-150LM Rail is for SSR Block. ID: SRS15W-150LM. Size: 15 mm. Rail Length: 150 mm. Pitch: 30 mm. Related products ...
THK Store-SRS-WM Set
SRS7, SRS7W, SRS9, SRS9W, SRS12, SRS12W, SRS15, SRS15W. LM rail standardlength(L0), 40 55 70 85 100 115 130, 50 80 110 140 170 200 260 290 ...
THK Linear Motion Guide SRS15WGMUU+150LM | WS BEARING ...
Brand: THK Item number: SRS15WGMUU+150LM. ... Model No. SRS7, SRS7W, SRS9, SRS9W, SRS12, SRS12W, SRS15, SRS15W. LM rail standard
THK SRS15W-150LM RAIL | THKbearing|ABBAbearing ...
Brand: THK Item number: SRS15W-150LM RAIL. ... SRS-W Rail is for SRS-WM/WN Block. *Not for block of SRS-WM Set. The tech specs for THK SRS15W-150LM RAIL ...
Caged Ball LM Guide - THK Technical Support
In addition, the LM block and LM rail use stainless steel, which is highly resistant to corrosion. ○ Compact. Since SRS has a compact structure where the rail.Missing: SRS15W- 150LM
SRS15W-150LM RAIL THK Linear Motion Guide | Lily Bearing
SRS15W-150LM RAIL THK Linear Motion Guide ; Maximum length, 150 mm ; Nominal rail size, 15 mm ; Measurement standard, Metric ; Hardness, 58 to 64 HRC ; Series ...Rail type: Caged Ball RailHardness: 58 to 64 HRCMaximum length: 150 mm
THK SRS15W-150LM RAIL INTERCHANGE
THK Bearings Part series SRS15W-150LM RAIL is a potential replacement for these common bearing part numbers:
SRS15W-150LM RAIL
SRS15W-150LM RAIL
SRS15W-150LM RAIL
SRS15W-150LM RAIL
SRS15W-150LM RAIL
SRS15W-150LM RAIL
SRS15W-150LM RAIL
SRS15W-150LM RAIL
Contact Us
- NACHI DRIVESHAFT,INC.
- Address7854 South International Drive, Columbus, IN 34509,U.S.A.
- Phone(Working Time)83-342-11555
- Fax
THK SRS15W-150LM RAIL Technical Articles
URB BEARING PRICE LIST 2019 |
TAPER ROLLER BEARING PRICE LIST |
GEM BEARING PRICE LIST |
THK Bearings CATEGORIES
- Cross-Split Spherical Roller Bearings
- Double Row Spherical Roller Bearings
- Single Row Cylindrical Roller Bearings
- Single Row Deep Groove Ball Bearings
- Single Row Tapered Roller Bearings
- Special Bearings
- Spherical Roller Thrust Bearings
- Double Row Self-Aligning Ball Bearings
- Single Direction Thurst Ball Bearings
- Double Row Angular Contact Ball Bearing
- Nok Seal
- Skf Shaft Seals
- Timken National Seals
- Wind Power Bearings
- Taper Roller Bearing
- YRT bearing
- Kaydon Bearings
- SKF Bearings
- THK Bearings
- Small V Belt
- 48r4289 Belt
- Multi V Belts
- Gates Snowmobile Belts
- K060685 Belt
Customers Who Viewed THK SRS15W-150LM RAIL Bearing Also Viewed
- HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)