Home>Products>THK Bearings>SRS9X-375LM RAIL THK Linear Bearing,Linear Motion Guides,Miniature Caged Ball LM Guide (SRS),Miniature Rail (SRS-M)
THK SRS9X-375LM RAIL MODELS
Need a CAD or 3D Model?
SRS9X-375LM RAIL THK Linear Bearing,Linear Motion Guides,Miniature Caged Ball LM Guide (SRS),Miniature Rail (SRS-M)
category
THK Bearings
THK SRS9X-375LM RAIL Bearing SPECIFICATIONS
- THK
SRS9X-375LM RAIL
- Two-Bolt Base
- Uncoated
- 40 mm
- 1.9375 in
- Round
- Max 250°
- 2.3125 in
- 2.6250 in
- NACHI DRIVESHAFT,INC.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Specifications for THK Bearings
- Two-Bolt Base
- Uncoated
- 40 mm
- 1.9375 in
- Round
- Max 250°
- 2.3125 in
- 2.6250 in
- Medium Duty
- 5.5000 to 6.7500 in
- Cast Iron
- .6250 in
- Set Screw
- Lubrication Fitting
- Contact/Lip
- MP
- Non-Expansion Bearing (Fixed)
- 5308C
- 8.7500 in
- 710563
- 4.5625 in
THK SRS9X-375LM RAIL SRS9X-375LM RAIL THK Linear Bearing,Linear Motion Guides,Miniature Caged Ball LM Guide (SRS),Miniature Rail (SRS-M) Characteristics
db - Cone Backface Backing Diameter | 3.86 in |
C1 - Dynamic Radial Rating (1 million revolutions)5 | 48600 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 9530 lbf |
Series | 595 |
B - Cone Width | 1.4300 in |
Aa - Cage-Cone Backface Clearance | 0.15 in |
r - Cup Backface To Clear Radius2 | 0.130 in |
da - Cone Frontface Backing Diameter | 3.58 in |
a - Effective Center Location3 | -0.1 in |
Bearing Weight | 6.9 lb |
Ab - Cage-Cone Frontface Clearance | 0.09 in |
d | 3.1490 in |
R - Cone Backface To Clear Radius1 | 0.14 in |
Da - Cup Frontface Backing Diameter | 5.71 in |
C90 - Dynamic Radial Rating (90 million revolutions)4 | 12600 lbf |
Cg - Geometry Factor11 | 0.142 |
C - Cup Width | 1.1875 in |
Cage Type | Stamped Steel |
K - Factor7 | 1.32 |
Cup Part Number | 592-B |
Same THK Bearings Supply Ability | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | d | D | C | T | B | B1 | Ea | Eb |
TVK3757L | KOYO | 37,4 mm | 57,3 mm | 21,9 kN | - | - | 2,784 mm | 56 mm | 44 mm |
VKBA 1375 | SKF | - | - | - | - | - | - | - | - |
T-HM237532/HM237510 | NTN | 160,325 mm | 288,925 mm | 47,625 mm | 63,5 mm | 63,5 mm | - | - | - |
T-HM237532/HM237510D+A | NTN | 160,325 mm | 288,925 mm | - | 142,875 mm | - | - | - | - |
T-HM237535/HM237510 | NTN | 165,1 mm | 288,925 mm | 47,625 mm | 63,5 mm | 63,5 mm | - | - | - |
T-HM237535/HM237510D+A | NTN | 165,1 mm | 288,925 mm | - | 142,875 mm | - | - | - | - |
T-HM237542/HM237510 | NTN | 174,625 mm | 288,925 mm | 47,625 mm | 63,5 mm | 63,5 mm | - | - | - |
T-HM237542/HM237510D+A | NTN | 174,625 mm | 288,925 mm | - | 142,875 mm | - | - | - | - |
T-HM237545/HM237510 | NTN | 177,8 mm | 288,925 mm | 47,625 mm | 63,5 mm | 63,5 mm | - | - | - |
T-HM237545/HM237510D+A | NTN | 177,8 mm | 288,925 mm | - | 142,875 mm | - | - | - | - |
T-HM237545/HM237513 | NTN | 177,8 mm | 289,974 mm | 48 mm | 63,5 mm | 63,5 mm | - | - | - |
HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Dimension SV:3.75 in; Shaft Size :85 mm; Dimension L Exp:4.54 in; Dimension H:1.50 in; Grease Lubrication - T Seal:1600 rpm; e - Geometry Factor:0.26; Dimension BC:11.75 in; Shaft Size Type:Metric; UPC Code:0883450341189; Dimension E:8.31 in; Dimension RV:0.71 in; Dimension L:4.46 in; Bea |
HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Double Cone Width:5.6875 in; K - Factor7:1.76; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:479000 lbf; R - Cone Frontface To Clear Radius2:0.130 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:124000 lbf; db - Cone Backface Backing Diameter:13.82 in; C90 - |
HSR45-2775L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Inner Ring Width:118 mm; Bore Taper:1/12; r - Outer Ring To Clear Radius2:3.0 mm; e - ISO Factor3:0.16; Reference Thermal Speed Rating (Grease):580; R - Inner Ring To Clear Radius1:3.0 mm; Cg - Geometry Factor8:0.0975; Y1 - ISO Factor5:6.17; B - Outer Ring Width:118.000 mm; da - Inner Ring Backi |
HSR45-2985L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Oil Lubrication - T Seal:1500 rpm; Housing Style:Round Flange; Pre Install Clearance Max:0.145 mm; Dimension R:0.59 in; Eng Internal Radial Clearance - Max:0.0057; Oil Lubrication - B/C/O Seal:400 rpm; Dimension BC:14.00 in; Float:0.083 in; C - Dynamic Load (Basic):170000 lb; e - Geometry Factor:0.2 |
HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Da - Outer Ring Backing Diameter:673.000 mm; Bearing Weight:222 Kg; r - Outer Ring To Clear Radius2:5.000 mm; Cg - Geometry Factor8:0.1037; B - Outer Ring Width:167.000 mm; Bore Taper:1/12; C0 - Static Radial Rating:8160000 N; D:720.000 mm; R - Inner Ring To Clear Radius1:5.000 mm; B - Inner Ring Wi |
HSR45-2040L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Major Diameter:119.94 mm; Removal Nut O.D. C:160.32 mm; Taper:1:12; L2:98.00 mm; Removal Nut:ARN-22; Sleeve Weight:4.25 lb; Diameter d:100 mm; Locknut:AN-20; Lockwasher and Lockplates:W-20; Bearing Number:22322K; a:4.00 mm; Tolerance1:-0.10 mm; Series:223K; Sleeve:SK-11023; |
HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Y2 - ISO Factor6:3.15; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):182; Y1 - ISO Factor5:2.12; K - Factor3:1.83; Da - Cup Frontface Backing Diameter:10.55 in; Cg - Geometry Factor8:0.117; Y - ISO Factor1:1.88; Series:LM241100; G1 - Heat Generation Factor (Roller-Raceway)7:774 |
HSR45-2880L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | a - Effective Center Location3:-12.2 mm; e - ISO Factor8:0.41; db - Cone Backface Backing Diameter:179.07 mm; C0 - Static Radial Rating:231000 lbf; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:8.6 mm; Series:99000; Y - ISO Factor9:1.47; G2 - Heat Generation Factor (Rib-Roller End):73.5 |
HSR35-1400L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Inside Ring Outside Diameter:3.980 in; Flange Thickness A1:22.2 mm; Dimension E:3.807 in; Dynamic Load Rating:15500 lbf; Inside Ring Width B:=Bearings1_Inside Ri; Housing Style:Four-Bolt Square Fla; Static Load Rating:10100 lbf; Housing Width A:2.626 in; Bearing Number:GE75KRRB; Bolt Size:M16; Weigh |
HSR45-2565L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cage Type:Stamped Steel; e - ISO Factor8:0.38; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; K - Factor7:1.53; Ab - Cage-Cone Frontface Clearance:1.8 mm; Cup Part Number:14283; R - Cone Backface To Clear Radius1:3.560 m |
HSR35-920L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Grease Lubrication - M/N Seal:2200 rpm; Grease Lubrication - T Seal:3200 rpm; Dimension M:1.99 in; C0 - Static Load:31900 lb; Dimension L Fix:3.29 in; Bearing Number:22211; Pre Install Clearance Min:0.0016 in; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.95; Dimension S:3.12 in; Dimension R:0.16 |
HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Sleeve Weight:48.50 lb; Locknut:N-052; L2:210.00 mm; Series:223K; Taper:1:12; Lockwasher and Lockplates:P-52; Removal Nut:RN-56; Sleeve:SK-28023; Diameter d:260 mm; Bearing Number:22356K; Major Diameter:301.27 mm; Tolerance1:-0.15 mm; Removal Nut O.D. C:385.78 mm; a:10.00 mm; |
HSR45-2355L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | H:242 mm; UPC Code:999999999; Seal Type:Labyrinth; J:350.00 mm; L:410.00 mm; Locating Rings (width x OD):SR200X17.5; Shaft Diameter d:85 mm; N1:24.00 mm; J1:70 mm; N:18 mm; A1:120 mm; Material :Cast Iron; Housing Mass:22.3 Kg; Lockwasher:MB19; End Cover2:EC522-619; A:175.00 mm; Seal:LO619; Lock |
HSR45-2145L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Cr - Dynamic Load Rating:71105 lbf; Series Type:Light Series; Note:This product line wa; Cor - Static Load Rating:96059 lbf; Housing Width:5.5 in; Dimension M :5-1/8 in; Maximum Speed:1970 rpm; Dimension K :3-1/4 in; Bolt Size:4 x 7/8; Dimension J1 :16 in; Bearing Type:Split Cylindric |
SRS9X-375LM RAIL THK Linear Bearing,Linear Motion Guides,Miniature Caged Ball LM Guide (SRS),Miniature Rail (SRS-M) Video
THK SRS9X-375LM RAIL Distributor | 养贞咪咕体育官网
Find details about thk SRS9X-375LM RAIL, 的详情,获取价格参考、专业技术支持和免费3D 绘图下载。
SRS9X-375LM RAIL - 上海养贞轴承
Find details about thk SRS9X-375LM RAIL, 的详情,获取价格参考、专业技术支持和免费3D 绘图下载。
SRS9X-375LM RAIL THK Linear Motion Guide - 上海养贞轴承
Find details about thk SRS9X-375LM RAIL, Get price reference, professional technical support and free 3D drawing Download.
THK SRS9X-375LM RAIL | THKbearing|ABBAbearing ... - dks-bearing
Description. THK SRS9X-375LM RAIL. units: mm. Model No. SRS 9X, SRS 12, SRS 15. LM rail standard length (L0), 55 75 95 115 135 155 175 195 275
SRS9X-375LM RAIL THK Linear Motion Guide | Lily Bearing
Part Number, SRS9X-375LM RAIL. Rail type, Caged Ball Rail. Maximum length, 375 mm. Nominal rail size, 9 mm. Measurement standard, Metric.
SRS9_en.pdf - THK
Note) Since stainless steel is used in the LM block, LM rail and balls, these models are highly resistant to corrosion and environment. Symbol for.2 pagesMissing: 375LM | Must include: 375LM
Miniature Rail (SRS-M) - THK
Miniature Rail (SRS-G) ; Size: 9. Rail Length (mm): 375. SRS9X-375LM RAIL, – ; Size: 9. Rail Length (mm): 1000. SRS9X-1000LM RAIL, – ; SRS9X-L RAIL - Custom Length.
SRS9X-375LM RAIL THK 微型导轨(SRS-G) - 球轴承
产品型号, SRS9X-375LM RAIL. Rail type, Caged Ball Rail. Maximum length, 375 mm. Nominal rail size, 9 mm. Measurement standard, 公制. 硬度, 58 to 64 HRC.
THK INC. SRS9M-375LM - Linear Motion Products - BDI
SRS9M-375LM ; LINEAR RAIL STAINLESS ... THK INC. Manufacturer Name. THK INC. Minimum Buy Quantity. N/A. Weight / Kilogram. 0. Product Group - BDI.
THK SRS9X-375LM RAIL INTERCHANGE
THK Bearings Part series SRS9X-375LM RAIL is a potential replacement for these common bearing part numbers:
SRS9X-375LM RAIL
SRS9X-375LM RAIL
SRS9X-375LM RAIL
SRS9X-375LM RAIL
SRS9X-375LM RAIL
SRS9X-375LM RAIL
SRS9X-375LM RAIL
SRS9X-375LM RAIL
Contact Us
- NACHI DRIVESHAFT,INC.
- Address7854 South International Drive, Columbus, IN 34509,U.S.A.
- Phone(Working Time)83-342-11555
- Fax
THK SRS9X-375LM RAIL Technical Articles
URB BEARING PRICE LIST 2019 |
TAPER ROLLER BEARING PRICE LIST |
GEM BEARING PRICE LIST |
THK Bearings CATEGORIES
- Cross-Split Spherical Roller Bearings
- Double Row Spherical Roller Bearings
- Single Row Cylindrical Roller Bearings
- Single Row Deep Groove Ball Bearings
- Single Row Tapered Roller Bearings
- Special Bearings
- Spherical Roller Thrust Bearings
- Double Row Self-Aligning Ball Bearings
- Single Direction Thurst Ball Bearings
- Double Row Angular Contact Ball Bearing
- Nok Seal
- Skf Shaft Seals
- Timken National Seals
- Wind Power Bearings
- Taper Roller Bearing
- YRT bearing
- Kaydon Bearings
- SKF Bearings
- THK Bearings
- Small V Belt
- 48r4289 Belt
- Multi V Belts
- Gates Snowmobile Belts
- K060685 Belt
Customers Who Viewed THK SRS9X-375LM RAIL Bearing Also Viewed
- HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)
- HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR)